Mecal Stripper-Crimper - SC11

Accessories

The SC11 Stripper-Crimper is a wire-stripping unit conceived to be integrated with a crimping station (press and applicator). In one smooth movement, the SC11 grabs the wire, strips it and moves it over to the applicator’s anvil, where it will be crimped to the terminal. PLC controlled, the electro – pneumatic actuating system grants ease of installation, use and maintenance. It can strip wires up to 3mm². and can be either coupled to end-feed mini applicators (for end-to-end linked terminals on a reel) or side-feed mini applicators (for carrier-linked terminals on a reel to be unrolled-left-to- right). It requires a specific adapting kit to be coupled to Mecal crimping presses. It can be cycled either by pedal or by a sensor that detects the presence of the wire to be stripped. Either way, the stripped wire will be automatically moved over to the applicator and crimped to the terminal. The SC11 can be used with multiple-core wires : - when crimping side feed terminals linked by front carrier, the minimum jacket stripping length is 25mm, which can go up down to 18mm if a special set of blades is used ; - if the side feed terminals are linked in the back, the minimum jacket stripping length is 18mm without special blades. The very good accessibility offered by the SC11 allows for a quick set-up time and easy maintenance. Produced under a quality Management System certified to ISO 9001 (TÜV).

Mecal Stripper-Crimper - SC12

Accessories

The SC12 Stripper-Crimper is a wire-stripping unit conceived to be integrated with a crimping station (press and applicator) and specifically designed to handle closed-barrel terminals. In one smooth movement, the SC12 grabs the wire, strips it and moves into the closed-barrel terminal over the anvil, where it will be crimped to the terminal. PLC controlled, the electro – pneumatic actuating system grants ease of installation, use and maintenance. It can strip wires up to 6mm². and can be either coupled to end-feed mini applicators (for end-to-end linked terminals on a reel) or side-feed mini applicators (for carrier-linked terminals on a reel to be unrolled-left-to- right). It requires a specific adapting kit to be coupled to Mecal crimping presses. It can be cycled either by pedal or by a sensor that detects the presence of the wire to be stripped. Either way, the stripped wire will automatically be moved over to the applicator and crimped to the terminal. The SC12 can be used with multiple-core wires, with a minimum jacket stripping length of 35mm. A specific kit allows the SC12 to handle traditional open-barrel terminals as the SC11. The very good accessibility offered by the SC12 allows for a quick set-up time and easy maintenance. Produced under a quality Management System certified to ISO 9001 (TÜV).

Mecal Stripper - SC19

Accessories

The SC19 is a stripper unit in line with the crimping axis (without transfer by wire) driven by an electro-pneumatic system. It can also be used with front-side feed mini applicators (for concatenated terminals wrapped on a reel) and side feed mini applicators (for terminals bundled by a band, wound on the reel with left to right winding). The SC19 is able to strip wires up to 2.5mm² of section and the machine is driven automatically, by a sensor mounted on board, or with the pedal. The necessary adjustments are simple and easy to access. The SC19 stripper unit cod. 790000030 can work exclusively in tandem with the pre-equipped Mecal press (SEE VERSIONS to have the code complete with adaptation kit). * In the use of multipolar wires, the minimum length of stripping is 20mm. This length depends on how the terminal used is tied and the dimensions of the personalization of the cutting blades of the mini applicator used.

Mecal TT1000 - Crimp force Analyser

Accessories

The TT 1000 Crimp Force Analyser is an on-line quality control system that checks and evaluates the force applied at any given crimping, identifying the crimpings that do not respect the parameters set by the operator. Easy and quick to be set up and intuitive to be used, the TT 1000 is a second generation Crimp Force Analyser, derived from the CMD CFA 1000 range but engineered specifically for the Mecal presses: together they provide the most cost effective solution on the market to the requirement for quality monitored wire termination. Product highlights include the following: Powerful 16 bit microprocessor allows faster evaluation or more complex algorithms On line statistics capability including mean, std ev, cp and cpk analysis Graphical Control Panel (GCP) allows on line viewing of force curves aiding fault diagnostics Operator Menus in English, German, Italian, Spanish and Portuguese languages Four digit alphanumeric password facility Useful batch counter facility for bench top applications Additional freely programmable I/O available Non-volatile terminal batch buffer holds the RUO results of the last 1000 terminations Rugged high quality enclosure Software upgrades can be easily installed to the CFA in the field The system is composed by four main components: the CPU (Central Processing Unit), containing the processor that elaborates the collected data the GCP (Grafic Control Pannel), the visual interface with the operator, fitted with a LCD screen (resolution 64 x 128 pixel) and the JOG control to easily choose the desired menu the piezoelectric transducer, that turns the applied crimping force into an electric signal sent to the CPU the encoder that let the CPU always know position, speed and direction of the press crankshaft

Mecal Crimping Pull Force - SMST

Accessories

It is used to measure the force - expressed in Newton - needed to pull a terminal off a crimped wire. The pulling speed can be set between 15 and 120mm/minute. The instrument has a serial communications port. Every SMST is tuned in our laboratory, and its calibration is carried out with Mecal specific equipment MST 0158, fitted with 546 QDT force analyzer. Also available as splice version.